Skip to main content
Got a quote for a new system? Free second opinion: we'll tell you if a repair will do.Free 2nd opinion on replacement quotes See all offersOffers

Electrical Panel Upgrade Cost in Orange County (2026 Prices)

A 200-amp panel upgrade in Orange County costs $4,500–$5,000 with permit and inspection included. Here is what is in that price, what adds to it, and how to tell if you need one.

Short answer: a 200-amp electrical panel upgrade in Orange County costs $4,500 to $5,000 with Smartchoice. That includes the new panel, grounding and bonding to current code, the city permit and inspection, and labeling of every circuit, with a one-year labor warranty. A sub-panel starts from $1,800. Relocating the meter, a 400-amp service, or utility-side work that Southern California Edison requires costs more and is quoted after a free on-site assessment.

Free on-site estimate · licensed C-10 electricians (CSLB #1120145) · permit and inspection handled: (949) 229-6766

Panel Upgrade Prices at a Glance

JobPrice
200-amp panel upgrade (from 100 amps or a fuse box)$4,500–$5,000
Replacing a Federal Pacific, Zinsco or Sylvania panel$4,500–$5,000 (same job)
Sub-panel (garage, ADU, EV charger)from $1,800, permit included
400-amp servicequoted after the on-site assessment
Meter or panel relocationquoted after the on-site assessment
Utility-side work (riser, service conductors)quoted separately once SCE has looked at the service
Dedicated 240-volt circuitfrom $650
Single breaker replacementfrom $275
On-site assessment and written quotefree

What the $4,500–$5,000 Includes

  • A new 200-amp Siemens panel and main breaker
  • Grounding and bonding brought up to current code
  • The city permit, the inspection and meeting the inspector
  • Scheduling the power shutoff and meter release with Southern California Edison
  • Every circuit moved over, tested and clearly labeled
  • Stucco patched around the new panel (painting the patch is up to the homeowner)
  • A one-year labor warranty

What Makes a Panel Upgrade Cost More

  • Moving the panel or the meter. Current code and utility rules sometimes don’t allow the new panel in the old spot (for example, inside a closet). A new location means more conduit, wire and wall work.
  • Utility-side work. If Southern California Edison requires a new overhead riser or new underground service conductors, that part is quoted separately after SCE has assessed the service.
  • Going to 400 amps. Larger homes, homes with an ADU, or a household running two EV chargers, a heat pump and a pool need more than 200 amps.
  • A sub-panel on the same job. Often added for a garage, an ADU or an EV charger.
  • Old wiring that can’t be reconnected safely. Damaged or undersized wiring found during the assessment is priced before any work starts, never in the middle of the job.

What does not change the price: the brand of your old panel. Replacing a recalled Federal Pacific or Zinsco panel is the same one-day job as a standard 200-amp upgrade.

Do You Need a Panel Upgrade, or Something Smaller?

Not every electrical problem needs a new panel. We look for the cheaper fix first.

  • One breaker keeps tripping: often a worn breaker (from $275) or an overloaded circuit. See circuit breaker repair.
  • You need one new 240-volt appliance and the panel has capacity: a dedicated circuit from $650.
  • The panel is full but the service is big enough: a sub-panel from $1,800.
  • You need the upgrade when the load calculation shows the service is too small. Typical cases: a 100-amp panel plus a Level 2 EV charger, a heat pump, an induction range or an ADU; or a Federal Pacific, Zinsco or Sylvania panel that an insurer or a home inspector has flagged.

Open slots in a panel don’t mean spare capacity. Code treats an EV charger or a heat pump as a continuous load that may use only 80% of its circuit’s rating, and the total has to fit the main breaker. Our load calculation checks your real appliances before we recommend anything.

How Long It Takes

A standard 200-amp upgrade is one day on site. Power is off for about four to eight hours and is back on the same day. The city inspection and SCE’s formal meter release follow within a couple of days; we schedule both. It takes longer only when the meter or service entrance is being relocated.

Rebates

Smartchoice is an SCE Charge Ready Home participating contractor. SCE decides who qualifies and what the program covers. Current programs for panels, EV chargers and heat pumps are on our rebates page.

One Company for the Panel and What It Powers

Most panel upgrades happen because of something else: an EV charger, a heat pump or a new AC. We hold both the C-10 electrical and C-20 HVAC licenses, so the panel and the equipment are sized together and installed on one schedule. See panel upgrades, EV charger installation and heat pump installation.

Looking for another price? See all our Orange County cost guides.

Panel Upgrade Cost FAQs

How much does it cost to upgrade from 100 to 200 amps in Orange County?

$4,500 to $5,000 with Smartchoice, including the panel, grounding and bonding, the permit and inspection, and circuit labeling. Relocating the meter, a 400-amp service or utility-side work adds to that and is quoted after a free on-site assessment.

Is the permit included in the price?

Yes. The city permit, the inspection and meeting the inspector are part of the $4,500–$5,000.

Does it cost more to replace a Federal Pacific or Zinsco panel?

No. It is the same one-day job at the same price as a standard 200-amp upgrade.

How much does a sub-panel cost?

From $1,800 with the permit included. The price depends on the distance from the main panel and the size of the sub-panel.

Will I be without power?

For about four to eight hours on the day of the work. Power is back on the same day.

Can I add an EV charger without upgrading my panel?

Often, yes. If the load calculation shows room, a dedicated circuit is enough, and a charger set to a lower amperage can stretch a tight panel. When the panel is really short on capacity, we recommend the upgrade because it is the safer long-term fix.

Is the estimate free?

Yes. The on-site assessment, the load calculation and the written quote are free.

Business Hours

Monday-Friday: 8AM-5PM
Saturday: 9AM-4PM

Quick Contact

Get a Call Back Today

Leave your number and we'll call you back the same business day.

    What do you need?

    We only use your number to call you about this request.

    Contact Us

    Prefer to Talk to a Person?

    Call us Monday to Saturday and a real person answers. Or book a visit online and we'll confirm the same business day.

    Or book a visit online